Course List
SOLAS Safepass
SOLAS Safepass - One day Occupational Health and Safety Training courses regulary held in MullingarSOLAS Safe Pass Course Content:The reasons for promoting SafetyHealth and Safety LegislationAccident preventionAccident Reporting and Emergency ProceduresHealth and HygieneManual HandlingWorking at heightsWorking with Electricity, Underground and Overhead Services.Use of Hand Held Equipment and ToolsPPESafe use of vehiclesNoise and VibrationsExcavations and confined spacesSOLAS Safe pass (safe pass) Course Duration: 1 Day
Safepass Training Times: 8.00am-5.00 pm
Safepass Assessment: Theoretical examination
Certification: SOLAS Safe Pass Card
Safepass Prerequisites:All candidates must bring :
A passport size photographPPS NumberPhotographic Identification
Safepass Training Times: 8.00am-5.00 pm
Safepass Assessment: Theoretical examination
Certification: SOLAS Safe Pass Card
Safepass Prerequisites:All candidates must bring :
A passport size photographPPS NumberPhotographic Identification
Signing Lighting & Guarding at Roadworks C.S.C.S.
The aim of this course is to provide the knowledge and skills to be able to evaluate, plan and install a safe system of signing, lighting and guarding at roadworks in accordance with the requirements of National Guidelines.
This course is certified under the Construction Skills Certification Scheme (CSCS). Duration 3 days Certification:
Successful applicants will receive QQI certification and a CSCS certification and card.Duration: 3 days
This course is certified under the Construction Skills Certification Scheme (CSCS). Duration 3 days Certification:
Successful applicants will receive QQI certification and a CSCS certification and card.Duration: 3 days
Manual Handling
This Manual Handling Training Course offers you up to date theory and current manual procedures involved with safe manual handling.
Manual Handling Course complies with the “General Application Regulation Regulations, Manual Handling of Loads”, which maintains that any staff involved in manual handling will need training in the safe manual handling of loads.
Content: Manual handling legislationManual handling risk assessmentRecognising a load which is too heavy or awkwardUnderstand the limitations of the spine and muscular systemLift and handling loads safelyDangers of careless and unskilled methodsPrinciples of levers and laws of motionAnatomy of the spine and muscular systemHow the body is harmed through incorrect manual handling techniquesImportance of physical fitnessPersonal protective equipmentLifting aidesThis Manual Handling Training Course also requires your direct help in safe manual handling of loads. This includes:Lifting to and from ground levelLifting to and from a heightPushingPullingLifting bags/sacks or other loads appropriate to the workplaceLifting techniques will then be made specific to your work activities using real-life situations, in your working environment, if possible.Validity Period of issued Certification & Refresher Training: 3 years.
Manual Handling Course complies with the “General Application Regulation Regulations, Manual Handling of Loads”, which maintains that any staff involved in manual handling will need training in the safe manual handling of loads.
Content: Manual handling legislationManual handling risk assessmentRecognising a load which is too heavy or awkwardUnderstand the limitations of the spine and muscular systemLift and handling loads safelyDangers of careless and unskilled methodsPrinciples of levers and laws of motionAnatomy of the spine and muscular systemHow the body is harmed through incorrect manual handling techniquesImportance of physical fitnessPersonal protective equipmentLifting aidesThis Manual Handling Training Course also requires your direct help in safe manual handling of loads. This includes:Lifting to and from ground levelLifting to and from a heightPushingPullingLifting bags/sacks or other loads appropriate to the workplaceLifting techniques will then be made specific to your work activities using real-life situations, in your working environment, if possible.Validity Period of issued Certification & Refresher Training: 3 years.
Health and Safety at Roadworks C.S.C.S.
This programme is designed for operatives who are required to work at roadworks, in both rural and urban situations, so as to understand the risks to their own safety from passing traffic and the need to avoid creating dangers for road users.
Course Summary:
Legislation for RoadworksSigning, Lighting & GuardingExcavation SafetyPlant & EquipmentMaterialsEmergency ProceduresMultiple Choice Exam Course Duration 1 Day
Certification:
Successful applicants will receive QQI certification and a CSCS certification and card.
Course Summary:
Legislation for RoadworksSigning, Lighting & GuardingExcavation SafetyPlant & EquipmentMaterialsEmergency ProceduresMultiple Choice Exam Course Duration 1 Day
Certification:
Successful applicants will receive QQI certification and a CSCS certification and card.
First Aid Response
FIRST AID RESPONSEPreviously known as Occupational First Aid
The aim of this First Aid Response course is to provide learners with the knowledge and skills to provide first aid for a person who becomes suddenly unwell or injured until the arrival of emergency medical services.
Company and onsite training available throughout Ireland.
On-site training is available for businesses and group bookings. Full PPE will be supplied. Please contact for more information. affiliated with (Safety Solutions)
Fire Safety Training
This course is for individuals who must respond to hazardous fire situations in the home, workplace or community. A fire warden is a defined workplace member responsible for sweeping their assigned floor or building and accompanying the employees and other individuals in their area to an allocated assembly point during an emergency or a fire drill per the Safety, Health and Welfare at Work Act 2005. No set number of fire wardens is legally required, but an employer should carry out a fire risk assessment to determine the number their company needs. This training will give trainees the awareness of essential fire safety duties to handle fire emergencies competently.
Topics covered include: Legislation Nature & behaviour of fire and smoke Fire assessment and prevention Fire Safety Management Fire Emergency Plans and procedures Fire Extinguishers & Blankets Fire Warden role
Topics covered include: Legislation Nature & behaviour of fire and smoke Fire assessment and prevention Fire Safety Management Fire Emergency Plans and procedures Fire Extinguishers & Blankets Fire Warden role
Abrasive Wheels Training
ABRASIVE WHEELS SETTERS COURSE
1. IntroductionCourse administration, aims and objectives.
2. Legislation and GuidanceAccident causation and costs.
3. Wheel SelectionsDiscussion concerning materials (hard & soft), materials to be removed, work piece geometry, machine types, speed and feeds, wet or dry operating conditions and dressing methods.
4. Wheel StorageDiscussion concerning the effects of atmospheric working conditions, protection from shock loading, cushioning between wheels, support from bending and distortion, and shock rotation.
5. Wheel TypesDiscussion on wheel size, shape, function, and fixing methods.
6. Wheel MarkingsDiscussion on British Standards marking system, BS4481, denoting abrasive type, grain, grade or hardness and bond type.
7. Practical DemonstrationPractical sessions on the procedures to be followed when mounting abrasive wheels on to various types of machines.
8. Final QuestionsEnd of course forum, question and answer session.
Close of Course
Course Duration; 4 Hours Aprox.
1. IntroductionCourse administration, aims and objectives.
2. Legislation and GuidanceAccident causation and costs.
3. Wheel SelectionsDiscussion concerning materials (hard & soft), materials to be removed, work piece geometry, machine types, speed and feeds, wet or dry operating conditions and dressing methods.
4. Wheel StorageDiscussion concerning the effects of atmospheric working conditions, protection from shock loading, cushioning between wheels, support from bending and distortion, and shock rotation.
5. Wheel TypesDiscussion on wheel size, shape, function, and fixing methods.
6. Wheel MarkingsDiscussion on British Standards marking system, BS4481, denoting abrasive type, grain, grade or hardness and bond type.
7. Practical DemonstrationPractical sessions on the procedures to be followed when mounting abrasive wheels on to various types of machines.
8. Final QuestionsEnd of course forum, question and answer session.
Close of Course
Course Duration; 4 Hours Aprox.
Location of Underground Services (LUGS, CSCS)
To provide the participants with the required knowledge and skills to carry out the location and avoidance of underground services when involved with excavation works.
– Legal & Occupational Responsibilities
– Liaison with other
– Risk Assessment
– Planning the work
– Safe Systems of Work
– Introduction to location & detection equipment – functional checks– Practical on-site location of underground services (by each delegate) – Practical techniques for locating various services – pipes, cables, street lighting, concrete reinforcing bars and locating tee connections.– Further practical exercise – incorporating all associated equipment – Maintenance & storage of equipment – Safe digging techniques – Questions & Answers
– Introduction to location & detection equipment – functional checks– Practical on-site location of underground services (by each delegate) – Practical techniques for locating various services – pipes, cables, street lighting, concrete reinforcing bars and locating tee connections.– Further practical exercise – incorporating all associated equipment – Maintenance & storage of equipment – Safe digging techniques – Questions & Answers
Signing Lighting & Guarding at Roadworks (2 Day Update)
To update existing CSCS - Signing Lighting and Guarding at Roadworks Cardholders
Content;
Roles and Responsibilities
Static Roadworks Classifications
Traffic Management Devices and Layouts
Traffic Management Applications
Planned Works
Semi Static Operations
Motorways and Dual Carriageways
Safe Systems of Installation and Removal
Traffic Management Checks
Traffic Management Records
Certification
A Certificate of Attendance shall be issued on completion